Description
Designed for Hurricane® and WaterBetter® Filter housings
Activated Carbon cartridges for Hurricane® and WaterBetter® filter housings – featuring 5 micron nominal pre-filtration. The industry’s largest carbon block cartridge.
– High Chlorine Removal
– High THM’s removal
– Lower initial pressure drops
– Reduced maintenance down time and cost
– Longer filter runs for fewer change-outs
– Increased contaminant removal – Taste, odors and DPB’s
– Install and easy to clean
Reduces PFOS / PFOA in Drinking Water
– Independently tested to reduce PFAS/PFOS and PFOA in drinking water- NSF STD 473 Raded for PFAS/PFOS and PFOA Reduction- NSF / ANSI / CAN Standard 61 Rated- Nominal Micron Rating – 5 Micron- Maximum Flow Rate for PFAS/PFOS / PFOA Removal – 5.0 gpm- Capacity for PFAS/PFOS / PFOA Removal – 30,000 gallons
Features
– High performance extruded activated carbon block technology
– Integrated 5 micron pleated pre-filter for extended life
– Three sizes for greater media surface area
– Low initial pressure drop compared to granular activated carbon (no channeling)
– Patented Dual Durometer end caps to ensure better sealing
– Engineered media for superior performance
– Cleanable and reusable in most application
– DBP (disinfection by-product) Tested
Applications
– Commercial/Residential Drinking Water Filtration – Industrial Waste Water Treatment
– Reverse Osmosis Pre-Filtration – Environmental Filtration
– Water Bottling Filtration – Industrial/Commercial Process Water
– Point of entry for the dwelling
Each Cartridge is individually shrink wrapped and boxed for protection
Specifications
| Nominal Micron Rating | 5 Microns |
| Media (sq ft) | 25 |
| Rec. Flow Rate (GPM) |
5 |
| Min. Carbon Content (lbs)* |
3 |
| Capacity |
90,000 gallons |
| Chlorine Reduction |
90-95% at 5 GPM |
| THM’s Reduction |
95-98% at 5 GPM |
| Filter Dimension | 7-3/4″ OD x 9-5/8″ H |
| End Caps |
Plastisol (pliable PVC) Dual Durometer |
| Center Tubes |
PVC, rigid and perforated |
| Temperature |
125°F (52°C) |
| Carbon |
High performance extruded activated carbon block |
| Outer Layer |
5 Micron nominal pleated Polyester-Plus™ media |
| Directional Flow |
Radial (outside to in) for low pressure drop |
* Approximate









