Description
Designed for Hurricane® and WaterBetter® Filter housings
– High Flow capability
– Lower overall operating cost
– Two types of pleated media for flexibility
– Reduced waste disposal
– Longer filter runs for fewer change-outs
– Increased contaminant removal
– Operator friendly
– Two temperature ratings to choose from: 200°F (93°C) and 250°F (121°C)
Features
– Fewer cartridges for fewer change-outs and lower maintenance cost
– Pleated filter media provides higher flow rates and lower initial pressure drop
– Pleated surface area provides higher loading capacity for longer filter life and increased paricle removal
– Aqueous and oil based fluid applications
– High surface area (40, 90 and 170 sq. ft.) in single cartridge design
Applications
– Hot Water Loops – Solvents
– Boiler Make-Up Water – Distillate Fuel
– Petrochemical – Fuel Oil
– Lubricating Oils – Hydraulic Fluids
– Cutting Fluids – Bio Fuels
Pressure Drop
Harmsco Premium Hurricane High Temperature Cartridges Technical Data Sheet
Specifications
Polyester-Plus™ – rated up to 250°F (121°C)
| Micron Rating | 0.35 Microns |
| Media (sq ft) | 40 |
| Rec. Flow Rate (GPM) |
35 |
| pH |
6.5 to 9.5 |
| Change Out Pressure Drop |
25 PSI (1.7 bar) |
| O-Rings and Sealing Grommet |
Buna-N Standard, Viton is optional |
| Filter Dimension | 7-3/4″ OD x 9-5/8″ H |
| Filter Media | Polyester-Plus™ |
| End Caps |
Powder coated metal |
| Center Core |
Powder coated perforated metal |
| Temperature |
250°F (121°C)** |
** Temperature limits vary and depend on pressure and time under load
