Description
Use a disc hiller assembly to create raised garden and seedbeds or bury ground crops such as potatoes and carrots. This 14 in. bed shaper can be used in a series of two attached to a tool bar to achieve the desired mounds on the field. This steel disc is equipped with a King style hub including a six bolt mounting 4-1/4 in. pattern. Each King hub is assembled to resist the wear and tear of continuous use and the elements.
The rugged 16 in. shank connected to the bed shaper is also forged of steel and is 1-3/16 in. in diameter. Adjust the width of the hilling discs assemblies for your specific requirements.
Specifications
- 14 in. disc hiller with 16 in. shank
- Shank diameter: 1-3/16 in.
- Steel construction
- King style hub with 6 holes
- Hub hole spacing 1/4 in. square bolts on 4-1/4 in. pattern
| Product Number |
Ref | Description | Qty Required |
|---|---|---|---|
| 11678 | 2 | 16″ Shank (1-3/16″ rd) | 1 |
| 30336 | 2 | 22″ Shank (1-3/16″ rd) | 1 |
| 35740 | 3 | Hub – No Bearings | 1 |
| 17861 | 4 | 206 GGH Bearing | 1 |
| 80970 | 5 | 12″ Blade 3 MM | 1 |
| 80971 | 5 | 14″ Blade 3 MM | 1 |
| 80973 | 5 | 16″ Blade 3 MM | 1 |
| 82403 | 6 | Snap Ring | 1 |
| 13099 | 7 | 3/4″ Lock Washer | 1 |
| 13109 | 8 | 3/4″ Hex Nut | 1 |
| 33955 | 9 | 3/4″ Flat Washer | 2 |
| 29842 | 10 | 3/4″ x 3-1/2″ Thin Head Bolt | 1 |
| 13103 | 11 | 1/4″ Hex Nut | 6 |
| 13093 | 12 | 1/4″ Lock Washer | 6 |
| n/a | 13 | 1/4″ Ribbed Bolt | 6 |
Should this product not fit your requirements, tool bar, or tractor, we carry a variety of disc hillers to offer.
