Description
One advantage of the UV BigBoy series is the convenient manifold mounting rack. The rack can be used to configure up to four chambers in parallel or in series. This allows the used to achieve either a higher UV dosage or higher flow rate (up to 60 GPM)
This mounting rack configuration provides easy access for cleaning and maintenance to the individual units without the need to shut down the entire water distribution line. The standard LED lamp monitor provides a visual verification the lamp is in operations.
Features
– Water Disinfection- Easy to change lamp and filters- Electronic Lamp indicator (LED)
– Lamp and ballast matched for quality assurance- Simple installation
These systems are for the supplemental treatment of disinfected drinking water which has been treated or other drinking water which has been tested and deemed acceptable for human consumption by the state or local health agency having jurisdiction. These systems are designed to reduce normally occurring non-pathogenic nuisance organisms and is not intended for the treatment of contaminated water. The contaminants and other substances reduced by this water treatment device are not necessarily in your water. In addition, the presence of certain contaminants in your drinking water does not necessarily pose a health risk.
Specifications & Performance
– Model: UVBB-1
– of Sumps: 1
– Sump Type: 20BB
– Sump 1 Content: UV
– Sump 2 Content: No 2nd sump
– Sump 3 Content: No 3rd sump
– Lamp : 20
– Power Used: 22 Watts
– Voltage: 115 VAC (220 VAC option is part number 15810200)
– Flow Rate: 15 GPM
– Dimensions: 28″ x 7.5″ x 9″
– Shipping Weight: 18 lbs
– Inlet/Outlet Size: 1-1/2″ NPT
Feed Water Supply
– Feed Water Pressure: 20-75 PSI (Must not exceed 75)
– Feed Water Temperature: 38° – 106° F
– pH Range: 6.5-9.5
– Total Dissolved Solids: <1500 mg/L
– Total Suspended Solids: <10 mg/L
– Turbidity: <5 NTU
– Hardness: <120 (7 GPG)
– Iron: <0.3 mg/L
– Manganese: <0.05 mg/L
