Description

SOK SK12V280H 280Ah LiFePO4 battery is designed for cold weather usage! You can safely charge at temperatures down to 4F by a standard charger or solar charge controller. Inverters R US hot tip: The heater pads draw power from the charger itself, so no power lost from the battery cells themselves.

SOK SK12V280H Features:

7 year warranty and maintenance free with a 8000~12000 cycles life span.
Detachable cover with replaceable BMS and cells.
Built-in heater pad for using in down to -4F.
Bluetooth4.0 , support iPhone or Android smartphone.
Support connect in parallel for larger capacity.
Built-in smart Battery Management System (BMS).
Low temperature charging cut-off.
High temperature charging or discharging cut-off.
Over charging and discharging protection.
Over current and short circuit protection.
Battery cells auto balance.
Note for connecting in series: DO NOT CONNECT OVER 4 Batteries IN SERIES, and make sure to add the battery voltage balancer.

SOK SK12V280H Charge Information:

Recommended Charge Current: 56 A
Maximum Charge Current: 120 A
Recommended Charge Voltage: 14.6 V

SK12V280H Discharge Information:

Maximum Continuous Discharge Current: 200 A
Peak Discharge Current: 250 A (7.5 s 2.5 s)
Recommended Low Voltage Disconnect: 10.4V

SK12V280H Size Information:

Terminal Type: M8, 5/16 lugs
Weight: 73 lbs.
Dimension (L x W x H): 13.07*9.52*9.84inch
Case Material: Black paint aluminum case

SK12V280H Temperature Information:

Discharge Temperature: -4 to 140 F
Charge Temperature: 4 to 113 F (built-in heater pad)
Storage Temperature: 23 to 95 F

The SK12V280H built-in heat pad turns on under the following conditions:

Temperature is below 0 C (32F)
A charger is connected and able to supply sufficient current to the pads
4A for each 100Ah battery
7A for each 206Ah battery

For example, on a cold evening after the temperature drops down to under 0C (32F), when charging the heated battery, the battery would go into low temperature protection. Charging the cells is disabled, and if the charger is able to supply a sufficient amount of current, the

heat pad would automatically turn on. When the battery temperature exceeds 5C (41F), the heat pad turns off, and charging the cells is re-enabled.

Certifications Information:

UL1973 & IEC62619 for battery cells.