Description
Morrison Bros. 9095SA 2 in. AST Overfill Prevention Valve
The 9095SA Aluminum Overfill Prevention Valve is installed at the fill port of a storage tank. Used in a pressurized tight fill application, the valve helps prevent tank overfills by closing when the liquid level reaches a pre-set warning level (90-95% full).
The valve is installed on a standard 2” NPT male connection and has a built-in bleed hole that allows the fill hose pressure to be relieved after the valve closes. This bleed hole also provides anti-siphon protection for the valve. The 9095SA comes with a 2″ Part A for mounting the valve with a 2″ NPT pipe going to a remote fill.
